5 Series E39 520i (M52TU) SAL
Version 1
Vibration damper and hub for vibration damper are two parts:
Installation:
Align locating bore in vibration damper to dowel pin.
Install and tighten down screws.
Tightening torque 11 23 3AZ .
Version 2
Vibration damper and hub for vibration damper are one part:
Screw special tool 11 8 190 to special tool 11 8 200 .
Version 2
Note:
Special tool 11 8 200 must snap into place in openings (1).
Version 2
When releasing and tightening down central bolt, grip special
tool 11 8 190 with assistance of a second person.
RA Removing and installing or replacing vibration damper (M52TU / M54 / M56)
BMW AG - TIS
05.02.2013 00:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -