5 Series E39 520i (M52TU) SAL
Remove the retainer (1) and pull out the bolts.
Unfasten screws.
Pull off retainer (1).
Note:
Do not soil the footwell carpet with brake fluid.
Disconnect clutch master cylinder (2) from hydraulic line and
remove with supply hose.
Lever switch module (1) out of clutch master cylinder (2) with a
screwdriver.
Release plug connection (3) and disconnect plug (4) from switch
module (1).
RA Removing and installing / replacing clutch master cylinder
BMW AG - TIS
05.02.2013 01:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -