5 Series E39 520i (M52TU) SAL
Remove heat shield (1).
Remove right heat shield.
Release screws.
Tightening torque, 26 11 1AZ.
Note:
Use self-locking nuts.
Grip propeller shaft and release nuts.
Tightening torque, 26 11 6AZ.
Bend propeller shaft downwards at center mount.
Detach propeller shaft from transmission output flange and tie
back to side on vehicle underbody.
Remove heat shield at rear.
Detach cable plug (1) from reverse gear switch.
Detach cable from fixtures.
RA Removing and installing transmission (S5D 200G / S5D 250G)
BMW AG - TIS
05.02.2013 01:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
