5 Series E39 520i (M52TU) SAL
Screw special tool 23 0 490 into one of two removal holes.
Withdraw radial seal from transmission housing with aid of impact
weight.
Fit special tool 23 2 460 onto transmission input shaft.
Coat sealing lips of new radial seal (1) with transmission oil and
push on up to transmission housing.
Remove special tool 23 2 460 from transmission input shaft.
Drive in radial seal (1) with special tool 23 2 430 as far as it will
go.
RA Replacing radial seal on input shaft (S5D 200G/ 250G)
BMW AG - TIS
05.02.2013 02:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -