5 Series E39 520i (M52TU) SAL
Caution!
When joining up engine and transmission, ensure ease of
movement of torque converter.
Note:
The sheet metal flywheel is equipped with three recesses for
the torque converter retaining tabs.
When joining together the engine and transmission, the three
retaining tabs on the torque converter must be aligned with
the three recesses in the sheet metal flywheel.
Failure to comply with this requirement leads to secondary
damage on the automatic transmission.
The torque converter or engine is not able to spin: this would
cause damage.
Note:
Bore on driver must point to center of aperture in cover plate.
Note:
Turn torque converter on transmission. Bores on lugs must
point to center of bores on flywheel.
Screw special tool 24 2 300 into lug.
RA Removing and installing automatic transmission (A5S 360R / 390R, M52TU/M54)
BMW AG - TIS
05.02.2013 02:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
