5 Series E39 520i (M52TU) SAL
24 12 568
Replacing radial seal for torque converter
(A5S 325Z)
After completing work, top up ATF level. Check/top up fluid
level in automatic transmission,
refer to 00 11 500.
(Transmission removed)
Remove torque converter,
refer to 24 40 002.
It is absolutely essential to use the approved automatic
transmission fluid in this automatic transmission,
refer to BMW Operating Fluids MG24.
Failure to comply with this requirement will result in serious
damage to the automatic transmission!
Remove radial seal (1) with special tool 00 5 010 and thrust
member 24 1 080 from pump housing.
Installation:
Pay attention to washer (1) under radial seal.
RA Replacing radial seal for torque converter (A5S 325Z)
BMW AG - TIS
05.02.2013 02:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -