5 Series E39 520i (M52TU) SAL
Remove heat shield (1).
Release screws.
Tightening torque, 26 11 1AZ.
Installation:
Replace self-locking nuts.
Grip propeller shaft and release nuts.
Tightening torque, 26 11 6AZ.
Bend propeller shaft downwards at center mount (1). Detach
propeller shaft from transmission output flange and tie back to
side on vehicle underbody.
Grip output flange (1) with special tool 23 0 020.
Release hexagon nut.
Detach output flange (1).
Installation:
Install hexagon nut with screw retaining compound.
RA Installing output flange add-on kit (A5S 360R)
BMW AG - TIS
05.02.2013 02:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -