5 Series E39 520i (M52TU) SAL
31 12 080
Removing and installing/replacing both
tension struts
Caution!
If the tension struts are replaced, an axle alignment check
must be performed.
Remove complete engine compartment shielding.
Remove left and right wheels.
Remove left and right air ducts.
Remove cap.
Installation:
Insert cap in clip.
Unfasten nut and remove screw.
Installation:
Fit plate (1).
Replace self-locking nut. Tightening Torque,
refer to Technical Data 31 12 1AZ.
RA Removing and installing/replacing both tension struts
BMW AG - TIS
05.02.2013 03:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
