5 Series E39 520i (M52TU) SAL
31 35 005
Removing and installing/replacing push rod
(stabilizer link) for left or right stabilizer
(Basis)
Note:
Only perform work with wheels in straight-ahead position.
Unfasten nut - brace with open-end wrench.
Installation:
The push rods are different and can be identified by the number
on the tube
Odd number = left push rod
Even number = right push rod
Replace self-locking nut. Fit washer (1) between bracket and ball
joint. Tightening torque,
refer to Technical Data 31 35 11AZ.
RA Removing and installing/replacing push rod (stabilizer link) for left or right s
BMW AG - TIS
05.02.2013 04:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -