5 Series E39 520i (M52TU) SAL
33 31 000
Removing and installing complete rear axle
carrier
Remove wheels,
refer to 36 10 300.
Remove propeller shaft,
refer to 26 11 000.
Remove left and right brake calipers and tie up on body,
refer to 34 21 745.
Remove left/right ABS impulse sensors.
Remove handbrake Bowden cables from handbrake lever,
refer to MG 34.
Remove heat shield from above propeller shaft.
If necessary, remove connector from ride height sensor.
Support final drive with workshop hoist 00 2 030 and special tool
33 4 390.
Rework special tool in accordance with drawing if necessary.
Cut (1) should be performed on both feet and cut (2) should only
be performed on the fixed foot.
RA Removing and installing complete rear axle carrier
BMW AG - TIS
05.02.2013 04:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -