5 Series E39 520i (M52TU) SAL
33 55 000
Removing and installing / replacing rear
stabilizer
Unfasten left and right stabilizer from stabilizer.
Mark stabilizer on left side of vehicle with paint.
Unfasten stabilizer from rear axle carrier and remove.
Installation:
Check rubber mount and replace if necessary.
Install stabilizer in correct position. The coloured mark on the
stabilizer must be on the left side of the vehicle.
Tightening torque,
refer to Technical Data 33 55 2AZ.
RA Removing and installing / replacing rear stabilizer
BMW AG - TIS
05.02.2013 05:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -