5 Series E39 520i (M52TU) SAL
34 32 861
Replacing all brake pipes
Special tools required:
•
34 5 100
Note:
The brake lines are only supplied in the straight version
and correct length with connecting nipple.
Caution!
Read and comply with General Information.
After completing work:
Bleed brake system.
New brake lines are bent into shape with bending tool 34 5 100 .
Removed brake pipes can be used as templates for bending.
Caution!
-
Protective coating of brake line must not be damaged
during bending.
-
Do not kink or bend back brake lines.
-
Watch distances to fixed and movable vehicle parts.
Brake lines may not contact or rub.
-
Tighten down brake line couplings with torque wrench.
Tightening torque:
Refer to Technical Data.
RA Replacing all brake pipes
BMW AG - TIS
05.02.2013 05:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
