5 Series E39 520i (M52TU) SAL
51 11 000
Removing and installing complete front
bumper
Unfasten left/ right screws and lift out wheel arch finishers (1) from
side.
Lever out expansion rivets on left/right and remove grill (1).
Release screws on impact absorber on left/right.
Installation:
Tightening torque 51 11 2AZ.
Version with Park Distance Control (PDC) and/or fog lamps:
Pull bumper back a little.
Disconnect plug connection for fog lamps and/or PDC on left/right.
Remove bumper.
RA Removing and installing complete front bumper
BMW AG - TIS
05.02.2013 08:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
