5 Series E39 520i (M52TU) SAL
51 12 432
Replacing central body molding on rear
bumper
Version without Park Distance Control (PDC):
Unclip and remove body molding with special tool 00 9 321
(folding strut).
Version with Park Distance Control (PDC):
Unclip body molding, unfasten ultrasonic converter and remove.
Lift chrome strip (1) out of clips (2) in body molding and remove.
RA Replacing central body molding on rear bumper
BMW AG - TIS
05.02.2013 08:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -