5 Series E39 520i (M52TU) SAL
Shape of glue bead:
(A) 8 mm
(B) 10
-1
mm
Caution!
Apply glue bead quickly and insert window. Skin formation
time of glue, maximum 10 minutes.
Maintain distance (A), (B) and (C) between glue bead and seal.
(A) 1 mm
(B) 1 mm
(C) 1 mm
Install rear window carefully using special tool 51 3 010. The
gasket must make uniform contact all round (center). Press rear
window upwards until gasket is at uniform distance from roof all
round.
Secure rear window with fabric adhesive tape (e.g. Tesa). If
necessary, brace with wooden wedge.
Caution!
Remove dirt from residual glue with Sika-Entferner 208
(sourcing reference: BMW Parts Service) before glue is hard.
Do not press out rear window glass again for this purpose.
Hardened glue can only be removed by machine.
RA Removing and installing rear window
BMW AG - TIS
05.02.2013 09:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
