5 Series E39 520i (M52TU) SAL
Installation:
Bend new clips (2) with special tool 52 0 050.
1 Support
2 Clip
3 Trim thread in support
4 Trim thread in cover
5 Cover
Only passenger seat (replacement of support):
Installation:
Fit new sensor mat.
Mark out points (2) on sensor mat (1) for passenger seat
allocation identification on liner and attach to foam rubber.
Guide connector through the bore (3).
Folds as illustrated in diagram are not permitted!
Note:
The operation "Replacing support" ends here.
Only passenger seat (replacement of sensor mat):
Remove sensor mat (1) for passenger seat allocation
identification, ensuring that no large areas of foam at damaged
marked points (2) (malfunction of passenger seat allocation
identification). Guide connector through the bore (3).
Folds as illustrated in diagram are not permitted!
RA Replacing seat cover on left or right front seat (normal/ manual)
BMW AG - TIS
05.02.2013 09:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -