5 Series E39 520i (M52TU) SAL
61 31 299
Removing and installing/replacing clutch
switch module
Necessary preliminary tasks:
•
Remove trim panel for pedal assembly.
Note:
Clutch master cylinder (2) is removed for purposes of clarity.
Lever out clutch switch module (1) from clutch master
cylinder (2) with screwdriver.
Unlock plug (4) and disconnect from housing (3).
Installation:
Clutch switch module is secured against incorrect installation.
Clutch switch module must snap audibly into place.
RA Removing and installing/replacing clutch switch module
BMW AG - TIS
05.02.2013 11:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -