5 Series E39 520i (M52TU) SAL
Twist all levers through approx. 90
°
and remove cable cover.
Remove connector, unfasten screws and lift out complete wiper
console.
Installation:
Insert wiper unit in body and tighten down by hand without
torsional stress. Tighten down screws in illustrated sequence.
Comply with Tightening Torque,
refer to Technical Data 61 61 6AZ
RA Removing and installing complete wiper console
BMW AG - TIS
05.02.2013 11:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
