5 Series E39 520i (M54) SAL
Installation:.
Slide connectin rail over both linkages until the ends of both
linkages are visitble in the bore (1).
Pull both linkages out of the flaps.
Unfasten clips and remove blower cover from lugs (1).
Installation:.
First insert lugs in the cover, then attach the clips.
Remove connector, unfasten screws and remove blower.
RA Removing and installing / replacing heater blower.
BMW AG - TIS
08.02.2013 10:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -