Removing and Installing Sealing Cap for BMW E39 520i
Remove snap ring (1).
Screw in special tool 24 1 352 until it is firmly connected to
sealing cap (1).
Remove sealing cap by screwing special tool 24 1 353 onto
special tool 24 1 352 .
Rub edge of new sealing cap with transmission fluid and install
sealing cap (1) with special tool 24 1 351 .
RA Removing and installing sealing cap on working piston (A4S 310R)
BMW AG - TIS
09.02.2013 12:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -