5 Series E39 523i (M52TU) SAL
Support transmission with a workshop hoist.
Release screws and remove cross-member.
Tightening torque, 23 71 2AZ.
Insert special tool 11 7 370 between engine oil sump and front
axle support.
Lower transmission.
Support engine at front with a workshop hoist.
Lift out retainer (4).
Pull selector rod out of joint and remove washers (5).
Installation:
Grease selector rod.
Grease,
refer to BMW Service Operating Fluids.
RA Removing and installing transmission (S5D 310Z/S5D 320Z)
BMW AG - TIS
14.02.2013 13:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -