5 Series E39 523i (M52TU) SAL
![background image](/bmw/5_Series_E39/523i_M52TU_SAL/page-832002.png)
Door joints and lid joints 4
±
1 mm.
Permitted parallelity deviation 1.0 mm.
Plane offset to relevant body section joining at back A = max. 1 mm inwards.
Exception:
Rear lid may protrude 0.5 mm outwards.
There must be a rear lid/tail panel gap
of min. 5 mm.
Gaps between hood lid and headlights and to front bumper.
a = 5
±
1 mm
b = 5
±
1 mm
c = 5
±
1 mm
RA Gap dimensions on doors /engine hood and trunk lid
BMW AG - TIS
14.02.2013 18:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -