5 Series E39 523i (M52TU) SAL
Important!
Failure to comply with this disassembly sequence causes the
web (4) to break, thereby destroying the finisher.
Move front seat into furthest forrward position.
(1)
Raise centre finisher slightly on detent head,
(2)
Unlock and lift out inner clip tabs,
(3)
Pull finisher backwards to remove.
Only US driver's side:
Pull off detent (1) for longitudinal seat adjustment.
Unfasten screws.
Tightening torque, refer to Technical Data 52 10 1AZ
Move front seat as far back as possible.
(A) Unlock cover and fold forwards.
(B) Disconnect connector (1) and remove (2).
RA Removing and installing left or right front seat (normal / electric)
BMW AG - TIS
14.02.2013 21:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -