5 Series E39 523i (M52TU) SAL
(A)
E38
80 mm
E39, E53
70 mm
Press switch in direction of "raise position" (fan setting) until lid is
raised to max. setting.
Note:
Grasp the bellows by hand only at the first fold (1) (risk of
damage).
Detach bellows starting from center (A) towards front and rear (B)
from glass slide/tilt sunroof lid (2).
Slacken screws (1) and (2) with special tool 00 2 130 .
Note:
Pull bellows down until screw (2) is accessible. Loosen screws
only to the extent that the glass sunroof lid can only just be
adjusted.
Close glass sunroof lid (zero position).
Press glass slide/tilt sunroof lid forwards, press downwards at
front and rear until ideal position is achieved and tighten down
screws.
Installation:
Tightening torque 54 12 2AZ.
Check function.
RA Adjusting glass sliding/tilting sunroof lid
BMW AG - TIS
14.02.2013 22:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -