5 Series E39 523i (M52TU) SAL
Caution!
Check that glass sunroof lid is securely seated.
Press glass sunroof lid at front on left/right with ball of thumb
from bottom to top.
The glass sunroof lid must not be able to be raised.
Setting lever with retaining screw:
Open glass sunroof lid approx. 250 mm.
Carefully press glass sunroof lid upwards and screw in and tighten
down securing screws (2) on left/right completely.
Setting lever without retaining screw:
If setting levers with retaining screws (1) are fitted, do not install
any retaining screws in thread (2).
Make sure retaining spring (1) is correctly seated.
Adjusting glass slide/tilt sunroof lid.
RA Removing and installing glass sliding/tilting sunroof lid
BMW AG - TIS
14.02.2013 22:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -