Replacing Trim Panel for On-board Monitor Control Panel - DIY Guide
65 52 520
Replacing trim panel for on-board monitor
(control panel)
Remove on-board monitor,
refer to 65 52 510.
Caution!
Place trim panel on special tool 12 7 192 (anti-static mat)
and ground in order to avoid a static charge.
Unfasten screws. Turn over frame.
Pull off connectors. Remove trim panel.
RA Replacing trim panel for on-board monitor (control panel)
BMW AG - TIS
15.02.2013 01:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -