5 Series E39 523i (M52TU) TOUR
Remove left bearing pin and screw for reverse gear pin in front
housing section.
Remove reverse gear switch and right bearing pin in front housing
section.
Lever out retaining ring (1).
Remove sealing cover (2).
Remove pressure spring (3) and catch pin (4).
RA Removing and installing complete drive and output shafts (S5D 260Z / 310Z / 320Z
BMW AG - TIS
16.02.2013 06:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -