5 Series E39 523i (M52TU) TOUR
Insert feeler gauge (1) between detent spring (2) and detent
disk (3) and set gap of 0.80 mm by moving detent spring (2).
Tighten down screws (4).
Tightening torque, 24 30 1AZ .
RA Removing and installing/replacing selector unit (A5S 360R/390R, A4S 200R)
BMW AG - TIS
16.02.2013 07:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -