5 Series E39 523i (M52TU) TOUR
Removing wheel electronics
Release Torx socket screw (1).
Remove wheel electronics (2).
Check filter surface (1) for pressure measurement for
contamination.
Note:
Wipe filter surface with a clean cloth only.
The wheel electronics must be replaced if the filter surface is
contaminated.
Release union nut with special tool 00 2 190; if necessary, grip
valve insert (1) at cylindrical section of ball head.
Remove valve insert from rim.
Remove washer (1).
RA Removing and installing / replacing RDC wheel electronics
BMW AG - TIS
16.02.2013 11:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -