5 Series E39 523i (M52TU) TOUR
51 12 432
Replacing body molding for center rear
bumper (touring)
Open trunk lid.
Lift seal (1), release left/right detent (2) (press downward) and pull
left/right finisher (3) somewhat toward rear.
Lift out left/right body molding with special tool 00 9 321 and pull
off toward rear.
Installation:
Clips (1) and detent (2) may not be damaged.
RA Replacing body molding for center rear bumper (touring)
BMW AG - TIS
16.02.2013 12:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -