5 Series E39 525d (M57) SAL
00 00 ...
Front and rear brake linings: checking lining thickness with measuring gauge. If linings are
replaced: cleaning brake shafts, checking brake disk thickness and surface, applying grease to
wheel centering on alloy wheels. If rear linings are replaced: checking parking brake linings
-
Check brake lining thicknesses with measuring gauge at front and rear
-
Clean brake shafts
-
Replace brake linings if they drop below minimum thickness (refer to Technical Data)
-
Replace brake discs if they drop below minimum thickness (refer to Technical Data) and in event of scoring, heat
cracks, lateral runout or thickness difference
-
Clean wheel centering on alloy wheels and apply a thin coating of grease
-
Remove front and (if necessary) rear disc brake pads
•
Remove and install front disc brake pads
•
Remove and install rear disc brake pads
Additional tasks when changing rear linings
•
Remove rear brake discs
•
Check parking brake lining for porosity and wear
•
Check ease of movement of expander lock
Note:
Defective brake pads/linings/brake discs must be repaired after consultation with customer and a separate
invoice issued
RA Front and rear brake linings: checking lining thickness with measuring gauge. If
BMW AG - TIS
17.02.2013 15:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -