5 Series E39 525d (M57) SAL
11 12 500
Removing and installing cylinder head (M57)
Special tools required:
•
00 1 450
•
11 3 350
•
11 8 040
(engine removed)
Remove right engine support arm.
Remove exhaust manifold together with exhaust turbocharger.
Secure engine to assembly frame, special tool 11 8 040 , with
retaining plate, special tool 00 1 450 .
Note:
Special tool 11 3 350 can be used again after first being
reworked.
Subsequent procedure is described in the sections Removing and
installing camshafts and cylinder head.
Refer to 11 12 100
.
RA Removing and installing cylinder head (M57)
BMW AG - TIS
17.02.2013 16:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
