5 Series E39 525d (M57) SAL
Remove gasket (1).
Remove gasket remnants from sealing surfaces (2) and clean.
Apply a bead of Drei Bond 1209 sealing compound (refer to BMW
Parts Service) approx. 3 mm high and 2 mm wide in area of
joints (1).
Caution!
Oil sump gasket must not be lubricated. Observe different
tightening torques of M6 and M8 screws.
Install oil sump with a new gasket.
Insert all screws until contact is made with screw head in each
case.
Tighten down all screws diagonally and evenly.
.
RA Removing and installing, sealing or replacing oil sump (M57)
BMW AG - TIS
17.02.2013 16:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -