5 Series E39 525d (M57) SAL
Installation:
Check dowel sleeve for damage and correct installation
position.
Note:
The position of the dowel sleeve (1) in the dual-mass
flywheel is marked by two notches next to the bolt hole in
question.
Installation:
Clean thread and install new micro-encapsulated screws.
Tightening torque, 11 22 1AZ .
RA Removing and installing or replacing flywheel (M57)
BMW AG - TIS
17.02.2013 16:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -