5 Series E39 525d (M57) SAL
Place special tool 11 6 321 on exhaust camshaft.
Note:
When tightening camshaft screw connection, grip camshafts
at hexagon drive.
Tighten down exhaust sprocket wheel with special tool
00 9 120 .
Tightening specification, 11 31 4AZ
.
Remove special tool 11 6 321 from exhaust camshaft.
Pull special tool 11 2 300 back until flywheel is no longer
secured in position.
Using special tool 11 6 480 , crank engine twice in direction of
engine rotation until first cylinder is back in TDC firing position.
Caution!
Do not turn the engine back.
RA Adjusting camshaft timing (M57)
BMW AG - TIS
17.02.2013 16:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -