5 Series E39 525d (M57) SAL
Release clamp (1) on EGR pipe.
Unscrew bolt (2).
Release screws (3) and press heat shield in direction of arrow.
Remove EGR pipe.
Lever out lock (1)
Lever out lock (2)
Detach water hose (3).
Installation:
Refer to general instructions for work on cooling system.
Release screws (4) on thermostat housing. Remove thermostat
housing.
Note:
Coolant thermostat is integrated in coolant-thermostat
housing and can only be replaced as a complete assembly.
Installation:
Clean sealing surfaces.
Replace gasket (1).
RA Removing and installing or replacing coolant thermostat (M57)
BMW AG - TIS
17.02.2013 16:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -