5 Series E39 525d (M57) SAL
12 41 020
Removing and installing/replacing starter
(M57)
Note:
All illustrations feature the E39 car. The procedure for the
E38 car is identical except for the first illustration.
Read fault memory. Switch off ignition.
Instructions for disconnecting and connecting battery,
refer to General Information MG12.
Disconnect and cover battery negative lead.
Remove underbody paneling at front.
Release retaining clips (1).
Caution!
The air duct can brake at the firewall if not carefully removed
and installed.
Carefully turn air duct (2) counterclockwise until it is no longer
locked in firewall.
Pull air duct forwards and remove towards top.
Remove protective cap (1).
Release screw (1).
Caution!
Do not remove oil measuring tube. Engine oil emerges.
Slacken nut (2) on battery positive connection point.
Tightening torque,
refer to 12 51 3AZ
.
RA Removing and installing/replacing starter (M57)
BMW AG - TIS
17.02.2013 17:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
