5 Series E39 525d (M57) SAL
Release nuts (1) on turbocharger.
Tightening torque,
refer to Technical Data 18 00 1AZ.
Installation:
Replace nuts (1). Apply a light coat of copper paste (CRC) to
thread, refer to BMW Parts Service.
Release nuts on pressure struts on both sides of stabilizer bar.
Release screw connection on stabilizer bar mount on right (1).
Slide stabilizer bar mount forwards.
Unfasten screws (1 and 2).
Remove bracket (3).
Remove primary catalytic converter.
RA Removing and installing/replacing primary catalytic converter (M57)
BMW AG - TIS
17.02.2013 20:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -