5 Series E39 525d (M57) SAL
34 00 048
Bleeding brake system with ABS/ASC+T
Read and comply with General Information:
Refer to 34 00 ...
Connect BMW Diagnosis and Information System (DIS).
Call up service function "Bleeding ABS/ASC+T hydraulics".
Connect brake fluid changer to expansion tank and switch on.
Note:
Check relevant operating instructions for each device.
Charging pressure must not exceed 2 bar.
Flush entire brake system
Attach bleed hose with container to bleed valve on rear right brake
caliper.
Open bleed valve and flush until clear, bubble-free brake fluid
emerges.
Close bleeder valve.
Follow same procedure on rear left, front right and front left wheel
brake.
Bleed rear-axle brake circuit.
Attach bleed hose with container to bleed valve on rear right brake
caliper.
Open bleed valve.
Carry out bleeding procedure with DIS.
Close bleeder valve.
Follow same procedure on rear left wheel brake.
RA Bleeding brake system with ABS/ASC+T
BMW AG - TIS
18.02.2013 02:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -