5 Series E39 525d (M57) SAL
52 13 015
Removing and installing / replacing controls
on left / right front seat (normal / manual)
Note:
Height of front seat must be set to top maximum setting.
Remove cover,
refer to 52 13 040
Check back-rest clearance:
Seat height (SHV) and back-rest adjustment (LNV) must be
correctly locked. To do this, actuate lever and front seat once only.
(A) = 0.5 ... 4.1 mm (LNV)
(B) = 0.5 ... 5.6 mm (SHV)
Important!
If inspection dimension is outside tolerance, seat frame must
be replaced,
refer to 52 13 020
or the controls must be replaced.
Rework is not permitted!
Important!
Do not fold or extend cover beyond edge (function error).
Remove actuating unit:
Remove front seat,
refer to 52 13 000
Disconnect Bowden cable for longitudinal adjustment from
controls,
refer to 52 13 014
RA Removing and installing / replacing controls on left / right front seat (normal
BMW AG - TIS
18.02.2013 12:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -