5 Series E39 525d (M57) SAL
52 14 899
Additional work (normal/ electric) with
defective drive for longitudinal adjustment
Move backrest forward to maximum extent.
Move front seat back/upwards
until screws (1) are accessible.
Release screws (1) on front seat (2).
Installation:
Replace screws (microencapsulation).
Tightening Torque,
refer to Technical Data 52 10 6AZ.
Raise front seat (1)
until support (2) is free of sleeve (3) on left/right.
Do not move front seat completely backwards (cable).
Raise front seat a little.
Feed cable (1) for belt tensioner (2) out of support (3).
Disconnect plug connection from servodrive for longitudinal seat
adjustment.
Tilt front seat (electric) back
so that it does not yet touch rear seat bench.
Release screws (1) from servodrive (2) for longitudinal seat
adjustment
and detach servodrive (2).
Disconnect plug connection (3) to servodrive for longitudinal seat
adjustment.
Activate the operating switch for the seat position adjustment:
(A) No function:
-
Disconnect plug connection (3).
RA Additional work (normal/ electric) with defective drive for longitudinal adjustm
BMW AG - TIS
18.02.2013 12:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -