5 Series E39 525d (M57) SAL
Note:
Follow procedure for cutting and stripping insulation from optical
fibres.
Insert stripped optical fibre (1) as far as it will go into pin contact
or jack (2).
Close pliers (3) fully.
Open pliers (3) and locking lever (4).
Remove optical fibre (1).
Important!
Make sure optical fibre is correctly seated in jack.
Right (A)
End of optical fibre (1) must be flush with tip of pin contact (2).
Wrong (B)
End of optical fibre (1) is not flush with tip of pin contact (2).
RA Crimping optical fibres
BMW AG - TIS
18.02.2013 13:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -