bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Replacing Battery Positive Lead (between Starter Motor And Battery Positive Supp|Page 785 > < 2 RA Replacing Solenoid Switch
Page 1
background image

12 42 510

Replacing battery positive lead (between
starter motor and battery positive support
point) (M54)

Read fault memory. Switch off ignition.

Observe safety instructions for handling vehicle battery.

Remove front splash guard.

Observe instructions for disconnecting and connecting battery.

Disconnect battery negative lead from battery and lay to one side.

Remove cover from fuel injectors.

Fold back protective cap (1).

Release nut.

Remove battery positive lead from support point.

Release nut (1).

Installation:

Tightening torque, 12 41 4AZ.

Disconnect battery positive lead (2) from starter motor.

Remove battery positive lead.

RA  Replacing battery positive lead (between starter motor and battery positive supp

BMW AG - TIS

19.02.2013  18:02

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Replacing Battery Positive Lead (between Starter Motor And Battery Positive Supp|Page 785 > < 2 RA Replacing Solenoid Switch