bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

5 RA Flushing Radiator > < 4 RA Removing And Installing_replacing Coolant Expansion Tank
Page 2
background image

Remove vent plug completely.

Unclip retaining cap.

Pull expansion tank towards rear and detach vent hose.

Lift coolant expansion tank out of lower retaining lugs.

Installation:

The retaining lugs on the expansion tank must locate in the fan
cowl.

Top up with recommended coolant only.

Vent cooling system and check for leaks.

RA  Removing and installing/replacing coolant expansion tank

BMW AG - TIS

19.02.2013  18:56

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

5 RA Flushing Radiator > < 4 RA Removing And Installing_replacing Coolant Expansion Tank