5 Series E39 525i (M54) TOUR
Grip propeller shaft.
Release nuts.
Tightening torque, 26 11 6AZ.
Bend propeller shaft downwards at center bearing (1).
Detach propeller shaft from transmission output flange and tie
back to side on vehicle underbody.
Grip clamping sleeve (1).
Release nut (2).
Note:
Adjust selector lever.
Grip cable (1) at hexagon (2).
Release nut (3).
Tightening torque, 25 26 1AZ.
Pull cable (1) out of holder.
Unlock and remove cable connector (1).
Unclip cable (2) from transmission housing.
RA Removing and installing automatic transmission (A5S 360R / 390R, M52TU/M54)
BMW AG - TIS
19.02.2013 19:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -