5 Series E39 525i (M54) TOUR
Align the replacement part and cut to fit if necessary.
Note the belt height adjustment!
Prepare the reinforcement plate from the scrap sheet metal.
Width of the reinforcement plates: approx. 60 mm
Overlapping: approx. 30 mm each.
Align the reinforcement plates.
Drill the holes for the plug welding at each joint surface.
Coat the joint surfaces on the body and the reinforcement plates
with zinc dust paint.
Align, fasten and weld the front reinforcement plate.
RA Replacing left or right side member cover (partial replacement of A-column and r
BMW AG - TIS
20.02.2013 00:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
