bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing_replacing Hydraulic Unit For Rear Lid Actuation (electro > < 2 RA Removing And Installing_replacing Trunk Lid Lock (upper Section Of Trunk Lid Loc|Page 2292
Page 1
background image

51 24 145

Removing and installing/replacing trunk lid
button (touring)

Remove lower trim power from trunk lid,

refer to 51 49 000

Unfasten nuts and cut through plug connection.

Remove button which actuates the trunk lid and extract the wire
(2).

Installation:

Perform function check with trunk lid open.

Note:

Only replace:

When being replaced, the button is in pieces (loose
components) because the finisher (1) must be painted in car
colour before being installed.

RA  Removing and installing/replacing trunk lid button (touring)

BMW AG - TIS

20.02.2013  02:21

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing_replacing Hydraulic Unit For Rear Lid Actuation (electro > < 2 RA Removing And Installing_replacing Trunk Lid Lock (upper Section Of Trunk Lid Loc|Page 2292