5 Series E39 525i (M54) TOUR
To prevent cement from gluing up the C-pillar finisher, you must
coat the web (1) on the C-pillar finisher and the rest of the spray-
coated area (2) with grease (e.g. rubber protection coating agent,
refer to BMW Parts Service).
Note:
No grease must make contact with the cemented area (3) of
the side window.
If applicable, do not remove spacer holder (4) and do not pull
off liner.
Cut nozzle to size.
(A) = 7 mm
(B) = 11
-1
mm
Note:
To apply uniform cement bead, use cartridge pistol (operated
by compressed air or electric power, Sourcing Reference:
BMW Parts Service).
Check expiry date of cement!
If applicable, produce a sample bead before cementing.
Cartridge must be arranged vertically against side window.
Shape of cement bead:
(A) = 7 mm
(B) = 11
-1
mm
RA Removing and installing left or right rear side window (touring)
BMW AG - TIS
20.02.2013 02:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
