5 Series E39 525td (M51) SAL
Apply light coat of oil to connecting-rod bearing shells.
Place bearing caps in position, making sure that matching
numbers are paired.
Install new conrod bolts.
Tighten down conrod bearing with special tool 00 9 120 or with
special tool 11 2 110.
Tightening torque,
refer to Technical Data 11 24 1AZ.
Note:
Fit reinforcement shell in correct installation direction.
Arrows point forwards.
Fit reinforcement shell.
RA Removing and installing or replacing all pistons (M51)
BMW AG - TIS
19.02.2013 22:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
