5 Series E39 525td (M51) SAL
65 52 510
Removing and installing on-board monitor
Pull off right wooden finisher.
Remove top left wooden finisher by pulling upwards.
Unfasten left and right screw. Raise left and right levers with
screwdriver and pull down finisher, then remove completely.
Unfasten screws.
Pull out on-board monitor torwards front.
RA Removing and installing on-board monitor
BMW AG - TIS
20.02.2013 11:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -